Catalog

Go Green!

MSDS

SALE

Additional Resources

Volume Discounts May be Available. Call 1-800-860-8891 for Details.
Mats

Stick-and-Stand Mats. 17 in x 17 in. 6 Mats/Case.

Manufacturer Number: 4464
Number: 963-791



A Picture of product 963-791 Stick-and-Stand Mats. 17 in x 17 in. 6 Mats/Case.

A Picture of product 963-791 Stick-and-Stand Mats. 17 in x 17 in. 6 Mats/Case.

A Picture of product 963-791 Stick-and-Stand Mats. 17 in x 17 in. 6 Mats/Case.

A Picture of product 963-791 Stick-and-Stand Mats. 17 in x 17 in. 6 Mats/Case.
Product
Add item to cart:
Price Unavailable. Call
1-800-860-8891 for price.
This item is not in stock and will take a few days to arrive into our warehouse

Product Details

Case* Information
Product Details:
Number: 963-791
Description: Stick-and-Stand Mats. 17 in x 17 in. 6 Mats/Case.
Additional Information: Stick-and-Stand mats are adhesive-backed mats designed to clearly mark floors and provide customers with a safe place to stand while waiting in lines.
Provides Clear Direction - Universal "stop sign" shape with shoe prints marks where customers should stand; mats can be placed at safe intervals in virtually anyconfiguration
Stays in Place - Adhesive backing keeps the mat flat and in place, even with heavy cart and buggy traffic
Hassle Free - Mats can be left in place during daily floor cleaning; floor scrubbers, mops, and brooms will pass right over them without causing damage
Won't Leave Residue - Stick-and-Stand mats are less likely to leave a sticky residue than floor decals
Odor Resistant - Anti-microbially treated for protection from odors
Slip Resistant - Low-profile high-traction surface provides additional traction and slip resistance
Will perform for up to 3 to 4 months under normal use

Cleaning Instructions

Please do not pick up the mat to clean the floor underneath until you are ready to replace it.
Stick-and-Stand mats feature a low profile and can be left in place during daily floor cleaning activities. Floor scrubbers, vacuums, brooms, and mops will pass right over it without causing damage to the mat. Standard floor scrubbers may be used to clean the mat. Use low settings for water and pressure, but note that extended use of floor scrubbers could result in removal of the printed design.
Stick-and-Stand mats are designed to dissipate water and dry quickly, however, standard fans and floor blowers can be used to expedite drying. For extremely wet conditions, use a wet vacuum or extractor to remove excess water.
Stick-and-Stand mats are designed to last up to 3-4 months under normal conditions. If the mats are installed in a high-traffic area or shows signs of wear or a weakened bond to the floor prior to its intended life, it should be replaced.
Installation Instructions

The floor must be clean and dry.
Measure your desired distance between mats.
Position the mat in the desired location, then press and smooth the mat into place.
BACKING
Material: Releasable adhesive; moisture barrier is a polyester film
OVERALL THICKNESS: 3/32" (0.0938")
STANDARDS & TESTING
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes flammability standard DOC-FF-1-70
Status: Current
Manufacturer Number: 4464
Manufacturer Name: M+A Matting
Case count 6 each
Case Count 6 each